Skip to product information
1 of 2

SIGMA S4 Remote Alarm CDL Immobiliser

SIGMA S4 Remote Alarm CDL Immobiliser

Regular price £110.00
Regular price Sale price £110.00
Sale Sold out
Tax included. Shipping calculated at checkout.
Supply and installation

Sigma S4 

A Non-Thatcham alarm & immobiliser system, providing perimeter and ultrasonic interior protection.

PLEASE NOTE THE BELOW:

As a insurance requirement a registered Scorpion installer/Dealer has to do the installation upon purchase details will be sent to a local installer/dealer in your area

  • A modular alarm system, providing perimeter and ultrasonic interior protection 
  • Supplied with 2 x single button radio keys, high power audio siren and red status LED 
  • The system has full, in-built, CDL control to power/switch a vehicle’s CDL system 
  • Single immobilisation circuit 
  • Key theft protection facility - only with an optional keypad 
  • Auxiliary siren or boot release output & armed accessory or total closure output 
  • Sophisticated programming and diagnostic facility via either the keypad or the CP3 workshop programmer 

Security Features

  • 2 x single button radio keys (programmable, water and shock resistant with random 66-bit encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out) 
  • Perimeter protection circuit for boot and bonnet (negative input) 
  • Perimeter protection circuit for doors (negative input) 
  • Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc) 
  • Ignition detection circuit 
  • Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable and automatically adjust if any movement is detected during the threshold time) 
  • Single immobilisation circuit (18 amp continuous/30 amp max) 
  • Manual arm, using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut - adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required) 
  • Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle 
  • A Key theft protection feature can be turned on to prevent the radio keys automatically de-activating the immobiliser when the alarm system is disarmed. In this mode the system's PIN must also be entered into the keypad before the vehicle can be started. This prevents the theft of a vehicle even with the owner’s keys 
  • Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger can be recalled using the keypad or a CP3 workshop programmer 
  • The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system's memory 

Convenience Features 

  • Full central door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period) 
  • Armed output (negative 200mA max) or this can alternatively be used as a total closure output (either via holding down the radio key when arming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period) 
  • Additional siren/pager output (negative 200mA max) or alternatively this can be used as a total open/boot release output (either via holding down the radio key when disarming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period 
  • Secure ignition PIN override 
  • Secure PIN override using the keypad 
  • Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation) 
  • The last circuit to trigger can be excluded using the keypad 
  • The vehicle’s battery voltage can be checked using the keypad 
  • The sensors are excludable using the keypad, ignition or remotely with the optional two button radio key 

Personal Safety Features

  • Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions 
  • Panic feature switched using the radio key and or an optional internal button 

S4 Box Contents

S4 alarm ECU
ECU brackets and fixing screws
S4 alarm installation wiring loom
3-wire accessory wiring loom
Siren with cable incorporating bonnet switch wire
Siren bracket and fixings
Red LED and loom
Two ultrasonic heads, looms and fixings
Two radio keys
Operating instructions and PIN stickers
Certificate of installation
Two Sigma window stickers
Sheet of remaining foil stickers

Optional Accessories

2012054 RF Pager
SIGAC22M 2 window closer module
SIGACTBC two button Radio Key conversion kit
Quality and Approvals
EU 95/56 directive (security) and EU 95/54 directive (electrical) – “e” marked: Two year warranty

E1 A-00 0474

Support

http://www.scorpionauto.com/PDF/S4.pdf

Feature table

Feature S4 S30 S32 S34
Method of Arming Radio Radio OE Radio
Immobilisation Circuits 1 2 1 1
Key Theft Protection (via Keypad) Y Y Y Y
Auto-arm Auto-rearm (Passive Arming) Y Y Y Y
Ignition Detection Circuit (or Internal Panic Button Facility) Y Y Y Y
Door "+" Protection Circuit Y Y Y Y
Door "-" Protection Circuit Y Y Y Y
Combined Boot/Bonnet "-" Protection Circuit Y Y Y Y
Closed Loop Protection Circuit (or Internal Panic Button Facility) ACC 8  ACC 8 ACC 8 ACC 8
Ultrasonic Interior Sensors Y Y Y Y
Additional, Single-stage Sensor Socket - Y Y Y
Additional, Dual-stage Sensor Socket with Pre-warn Facility - Y Y Y
Ultrasonic Interior Sensor Disable Facility Y Y Y Y
Sensor/s Disable Facility:        
          1= via Keypad (optional)  1 1 1 1
          2= via Ign & Radio Key  2 2   2
          3= via Ign & Inhibit Input     3  
          4= remotely via 2 Button Radio Key (optional) 4 4   4
          5= remotely via OE repeated arm/disarm     5  
Facility to Upgrade to Two-Button Remote Y Y - Y
In-built Central Door Locking Control (Full) FULL FULL NEG FULL
Total Closure from Extended CDL Pulse Y Y - Y
Alarm Armed Output* ACC 1 ACC 1 ACC 1 ACC 1
Additional Siren / Pager Output** ACC 2 ACC 2 ACC 2 ACC 2
Total Closure Output*: ACC 1 ACC 3 - ACC 3
          1= Timed output on every arm.   1 or 2   1 or 2
          2= Output whilst button 1 held on arming 2 only      
Boot Release / Total Open Output ACC 2 ACC 4 - ACC 4
          1= Timed output on every arm   1 or 2   1 or 2
          2= Output whilst button 1 held on disarming    OR 2 only      
Remote Engine Start / Stop Output (Additional Module Required) - ACC 4   ACC 4
          3= When button 1 & 2 held together   or 3   or 3
Interior Light Illumination Output - ACC 5 ACC 5 ACC 5
Headlight Illumination Output - ACC 6 ACC 6 ACC 6
Second Stage Unlock Output - ACC 7 - ACC 7
Hazard Light Signalling Y Y Y Y
LED Colour RED TRI-COLOUR TRI-COLOUR TRI-COLOUR
Trigger Identification Via LED Flash-back Y Y Y Y
Battery Back-up Data Siren (Thatcham) - Y Y Y
High-power Audio Siren Y - - -
External Panic Facility from Remote Y Y - Y
Ignition Operated PIN Override Y Y Y Y
Ignition Operated Radio Key Teaching Y Y - Y
Facility to Connect Keypad  Y Y Y Y
Facility to Connect Keypad / Touch Key Override

Y

Y

Y

Y

 

*On S4 models only the alarm armed output and the total closure output are mutually exclusive as they both use the acc 1 wire

**On S4 models only the aux siren/pager output and the total open/boot release output are mutually exclusive as they both use the acc 2 wire

View full details

Contact form